Benefits Of Using Carbon Fiber in Automobiles

Oct 04, 2024

Leave a message

1. Automobile body and chassis. Since carbon fiber reinforced polymer-based composite materials have sufficient strength and rigidity, they are the lightest materials for manufacturing major structural parts such as automobile body and chassis. It is expected that the application of carbon fiber composite materials can reduce the weight of automobile body and chassis by 40% to 60%, which is equivalent to 1/3 to 1/6 of the weight of steel structure. The British Material System Laboratory has studied the weight reduction effect of carbon fiber composite materials. The results show that the carbon fiber reinforced polymer material body weighs 172 kg, while the steel body weighs 368 kg, a weight reduction of about 50%.

2. Brake pads. Carbon fiber is also used in brake pads because of its environmental protection and wear resistance, but products containing carbon fiber composite materials are all expensive, so this type of brake pad is currently mainly used in good cars. Carbon fiber brake discs are widely used in racing cars, such as F1 racing cars. It can reduce the speed of the car from 300 km/h to 50 km/h within a distance of 50 m. At this time, the temperature of the brake disc will rise to more than 900 ℃, and the brake disc will turn red due to the absorption of a large amount of heat energy. Carbon fiber brake discs can withstand temperatures of 2,500°C and have very good braking stability.

3. Wheels. The wheel series launched by German wheel manufacturing experts adopts a two-piece design. The outer ring is made of carbon fiber, and the inner hub is a lightweight alloy, with stainless steel screws. It is about 40% lower than the weight of ordinary wheels of the same size. Take a 20-inch wheel as an example. The weight of the wheel is 6 kg, while the general wheel weighs about 18 kg. The RX-X type high-end car special wheel made of CFRP by Kahm Company in the UK weighs only 6 kg, can travel at high speed, and can minimize the radial inertia force of the wheel. The world's lightest carbon fiber/magnesium wheel developed by DYMAG Company in the UK consists of a carbon fiber wheel net and a magnesium brake disc, which are connected with special titanium-plated hardware.

4. Drive shaft. The stress of automobile drive shaft is relatively complex, especially when it has to bear a large torque. The characteristics of anisotropy, high specific strength and relatively low specific modulus of carbon fiber reinforced composite materials are fully considered, so the use of carbon fiber reinforced composite drive shaft can replace metal products and meet the use requirements. Carbon fiber drive shaft not only reduces 60% of the weight, but also has better fatigue resistance and durability.

As the mainstream of future automotive material development, carbon fiber materials will play a very important role in the future automotive industry. The application of these new fiber composite materials can meet the functional requirements of high temperature resistance, high strength and vibration and noise reduction of automobiles, realize design modularization, production efficiency and material recycling, and further reduce weight and cost.