Jaguar
Your Leading Jaguar Carbon Fiber Parts Supplier
Wzleiyu Tuning Auto Parts Co.,Ltd. is a leading professional factory which its standing creating carbon fiber parts for worldwide customers for more than 30 years. We focus on stable quality, advanced production methods, and strict inspection standards to support reliable long-term supply. We also provide efficient service, technical support, and flexible customization solutions to meet the diverse needs of our clients.
Why Choose Us
Rich Experience
With over 30 years in carbon-fiber production, we understand the technical needs and quality expectations of international wholesale buyers.
Quality Assurance
Every batch comes with a full inspection report, helping buyers reduce quality risks and maintain confidence in long-term supply.
OEM & ODM Available
Our engineering and sales teams offer one-to-one service, supporting product selection, technical questions, and custom development for different markets.
Broad Market
We supply the USA, Dubai, Qatar, Europe, Australia, Korea, and Japan, showing stable demand and strong performance in major international markets.
Specifications of Jaguar Carbon Fiber Parts
|
Part Type |
Fiberglass Wheel-Arch / Fender Kit (10 pieces set) |
|
Material |
High-quality Fiberglass Reinforced Polymer (FRP) |
|
Inclusion |
Full kit: front & rear wheel-arch extensions / fenders (10 pieces total) |
|
Intended Use |
Aftermarket wide-body / wheel-arch modification, aesthetic enhancement, wider wheel/tire fitment |
|
Finish (as supplied) |
Primed or raw fiberglass, ready for paint or custom finish |
|
Compatibility |
OEM bumpers, side skirts, wheel houses — designed to match stock mounting points |
|
Painting / Customization |
Fiberglass is paintable — allows body-color match or custom paint/clear coat |
|
Durability |
Resistant to weather, moisture, and minor impacts; will not corrode |
|
Weight Increase |
Slight weight addition over stock arches; suitable for street and show use |
|
Shipping & Packaging |
Parts packed in protective foam + reinforced export-grade carton to prevent shipping damage |
Jaguar Carbon Fiber Parts: Applicable Models
Vehicle Fitment: Jaguar F Type (2014–2023)
All body versions covered by kit when matching OEM wheel arch shape
Installation Method: Bolt-on / screw-on; optionally secured with adhesive or sealant for better fit
Installation Tips of Jaguar Carbon Fiber Parts
Our products are good fitment due to handcrafted works, we need let our customers know that little adjustment on trimming when installing are acceptable.
In order to install these products, please go to professional automobile mechanical car shops and let them install. Screws and 3M tape are highly recommended for install these kind of products.
Maintenance of Jaguar Fiberglass Fender
Prepare the Damaged Surface
Before you begin, remove the fender from the car and place it on a protected level surface. Use the die grinder to remove the damaged area of the surface thoroughly. Wipe the surface down using a rag which has been dampened in acetone. When this is completely dry, you can continue. Cover the back of the repaired area from the inside of the fender. Use thick plastic sheeting for this and attach it firmly in place using a spray-on glue. This will help to make sure that the fiberglass will be supported until the repairs are complete.
Prepare the Fiberglass Mat
Cut off sections of the fiberglass mat so that they are the same size as the area that need to be repaired. You will likely need multiple layers of this. You will need to make sure you have enough layers to bring the repaired area back up to the thickness of the original fiberglass. Each layer should be a little large than the previous one so that the repaired area will not form a ledge and will instead taper gradually.
Mix the Polyester Resin
The polyester resin should be mixed with about 2 percent catalyst as directed by the instructions on the packaging. Use a paint stirrer to thoroughly mix it. Apply a coat to the repair area using a felt roller. Make sure that any bubbles of air and drips are properly eliminated. Apply the sections of fiberglass mat to the repair area, starting with the smallest one first. Saturate it in the polyester resin mix and continue in the same manner with the following layers until they have all been placed. Allow three hours for the fiberglass to harden.
Sand the Repaired Area
Sand down the repaired area using a 200 grit piece of sandpaper. Using a rag soaked in acetone again, wipe down the area.
Apply the Fiberglass Filler
Mix the fiberglass filler with 2 percent catalyst and make it into a putty by working the catalyst into the filler. Apply this over the repaired area and allow it to harden. Finally, sand it down so that the repaired area blends seamlessly in with the surrounding fender.
Customization Options
|
Color |
Customizable |
|
Shape |
Customizable |
|
Size |
Customizable |
|
Surface Finish |
Matte, forged, glossy, or honeycomb textures |
|
Logo |
Customizable |
|
MOQ |
Customizable |
Storage of Subaru Carbon Fiber Parts
Choose a cool, dry place to prevent warping, resin breakdown, or moisture damage.
Avoid stacking heavy items on top of carbon fiber components.
Keep items away from direct heat or prolonged mechanical stress.
① Please send us photos of your car front, rear and sides, so that we search for matching products you need to install in the fastest way.
② If customer inquiry its for business propose, please let our sales staff know and he will send to appropriate department which has special rules for business inquiries customers and Wzleiyu Tuning have prosperous experience to help each customers stand in their local market.
③ Our company accept oem and odm inquires and we will evaluate it.
④ Once customer places an order with Wzleiyu Tuning, we will arrange our professional worker to follow up your order and letting customer know each details of the order.
Payment Terms
Payment acceptable in TT, Western Union or Paypal.
Contact our sales team first for other methods.
Deposit of 50% are available, balance need to be paid before product shipment.
Packing & Transportation
Packaging Details
• We package all products with bubble wrap, carton box and wooden box. Optimal for both national and international shipping whether by sea, air or road.
• Our wooden boxes are strong and durable can protect the items during the transportation.
FAQ
We are one of the most professional jaguar auto parts manufacturers and suppliers for over 30 years. Please rest assured to buy high quality jaguar auto parts at competitive price from our factory. Contact us for discount information.
For Jaguar Ftype Fenders Wheel Arch, New Style Carbon Fiber Rear Trunk Spoiler Wing Fit for Jaguar F Type 14 23, Rear Trunk Spoiler Wing For Jaguar Ftype